leqephe_banner

Lihlahisoa

Likotoana tsa ho cheka tsa CNC KJ1

Tlhaloso e Khutšoanyane:

Lintlha tsa Tekheniki:

  • Litšepe tsa boleng bo holimo tsa Tungsten Carbide+Strength
  • Lithako tse 2 tsa spiral (Z2)
  • Fana ka qetello e ntle ka lehlakoreng le ka tlase la workpiece
  • Ejection ea holimo ea chip

 

Aptlhaloso:

E sebelisoa mochining o borang feela le lisebelisoa tsa ho phunya lithapo.

Sebelisa ho cheka mekoting ea lehong le tiileng, metsoako ea lehong, MDF, plywood, lehong le thata le le bonolo.

 

 

Li-drill bits tsa KJ-1 ke lihlahisoa tsa rona tse hlahelletseng tse entsoeng ka mechini ea machining ea 5-axis.

Likotoana tsa ho cheka tsa KJ-1 li entsoe ka ntlha ea drill ea tungsten carbide, 'mele oa ho phunya carbide ea tungsten le shank ea tšepe.Ha e le mokhoa oa ho tjheseletsa, KJ-1 e boetse e amohela welding e tšoanang ea plug-in joalo ka TCT.Hobane likotoana tsa ho cheka tsa KJ-1 li hloka ho jara torque e eketsehileng, plug-in welding e ka eketsa sebaka sa ho tjheseletsa ho netefatsa botsitso bo akaretsang ba borokho.Ka mokhoa o ts'oanang, e le ho fihlela litlhoko tse fapaneng tsa ts'ebetso, re boetse re sebelisa carbide e fapaneng ho tloha ho KJ-1 ho ea ho KJ-2 le ZY.


Lintlha tsa Sehlahisoa

Bokhoni ba tlhahiso ea feme ea YASEN

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

Seo likotoana tsa KJ-2 le ZY li ka se etsang, KJ-1 li ka se etsa.'Me KJ-1 e na le nako e telele ka ho fetisisa ea mefuta ena e meraro.

The angle ea tloaelehileng KJ-1 drill bits e boetse e fapane le ea KJ-2 le ZY.

'Me bakeng sa mefuta e mengata ea likotoana, KJ-1 e ka etsoa ka mokhoa o ikhethileng.Kahoo haeba u na le litlhoko tse ling tse akaretsang tsa moralo bakeng sa sekhechana sa ho phunya, KJ-1 e ka kopana le tsona.KJ-1 e tšoarella haholoanyane 'me e loketse boholo bo bonyenyane.Ka lebaka la tungsten carbide e eketsehileng, KJ-1 e ka lekana bakeng sa mosebetsi o mongata o khethehileng.

Bakeng sa boholo ba 2.5-8, re boetse re fana ka li-drill tsa KJ-1 bakeng sa carbide e tiileng eo karolo eohle e leng carbide e kenyelletsang shank.

KJ-1 Drill bits mosebetsi o ka sehloohong bakeng sa MDF, chipboard, laminated le mefuta efe kapa efe ea lehong.

'Me li-drill tsa KJ-1 li entsoe ke setsi sa machining sa 5-axis, kahoo likotoana tsena li na le ho nepahala ho fetisisa.Haeba u na le tlhokahalo ea ho nepahala ha masoba, ke nahana hore likotoana tsa KJ-1 e tla ba khetho ea hau e ntle ka ho fetisisa.

CNC KJ1 mapolanka a cheka likotoana tsa 3

Re boetse re amohela litlhoko tse ikhethileng tsa KJ-1 step drill bits.Esita le bakeng sa mehlala e meng, KJ-1 e theko e tlaase.

Bareki ba bangata ba khetha ho sebelisa KJ-1 setsing sa machining, se ka fanang ka papali e felletseng mesebetsing ea sona.

Haeba u na le litekanyetso tse phahameng bophelong ba tšebeletso, ho nepahala ha sehlahisoa, ho sebetsa le ho sebetsa hantle, ke nahana hore li-drill tsa KJ-1 li tla finyella litlhoko tsa hau.

Litlhaloso

Nomoro Tsela ea ho potoloha/R Lehare la lehare/D Bolelele ba lehare/L
20101/20201 R/L 2 57/70
20102/20202 R/L 2.5 57/70
20103/20203 R/L 3 57/70
20104/20204 R/L 3.5 57/70
20105/20205 R/L 4 57/70
20106/20206 R/L 4.5 57/70
20107/20207 R/L 5 57/70
20108/20208 R/L 5.5 57/70
20109/20209 R/L 6 57/70
20110/20211 R/L 8 57/70

Mokhoa oa tlhahiso

1 .Likaroloana tse ntle tsa tšepe e pota-potileng ea tungsten le ts'ebetso e tlase ea bohale li netefatsa boleng ba weld.

2 .Moeli oa lehare la mofuta oa Epsilon le moralo o mobe oa mokokotlo oa mokokotlo.

3 .The four axis cnc machining center tool e tiisa ho nepahala ka katleho ke thekenoloji ea mohato o le mong.

CNC KJ1 ho betla mapolanka likotoana tsa4

Litlhaloso

Nomoro Tsela ea ho potoloha/R Lehare la lehare/D Bolelele ba lehare/L
40101/40201 R/L 2 57/70
40102/40202 R/L 2.5 57/70
40103/40203 R/L 3 57/70
40104/40204 R/L 3.5 57/70
40105/40205 R/L 4 57/70
40106/40206 R/L 4.5 57/70
40107/40207 R/L 5 57/70
40108/40208 R/L 5.5 57/70
40109/40209 R/L 6 57/70
40110/40211 R/L 8 57/70

Mokhoa oa tlhahiso

1 .Likarolo tse ntle tsa turst steel round ber le ts'ebetso ea lechato e tlase ea mocheso li netefatsa boleng ba weld.

2 .V-lype blade edge le lebelo le potlakileng la ho cheka li netefatsa hore artifacl ha e putlama.

3 .Setsi sa machining sa axis cnc se tse hlano le sona se tiisa ho nepahala ka mokhoa o atlehileng ke theknoloji ea ho bopa e mohato o le mong.

CNC KJ1 ho cheka lehong likotoana tsa 5

  • E fetileng:
  • E 'ngoe:

  • Mianyang Yasen hardward Tools Co.,Ltde ikhethang ka mefuta e fapaneng ea li-drill tsa mapolanka, li-Hinge boring bits, manonyeletso a potlakileng le li-milling cutters tsa Solid carbide, tse nang le moralo o motle haholo, lisebelisoa tse tsoetseng pele tsa tlhahiso, lisebelisoa tse tsoetseng pele tsa ho lemoha le sehlopha sa litsebi.Ho sebelisa sete e felletseng ea mela e tsoetseng pele ea tlhahiso ea mochini oa CNC le theknoloji e tsoetseng pele ea tlhahiso.Lisebelisoa tsa lisebelisoa tsa lisebelisoa li tla sebelisa likaroloana tsa ultrafine tsa tungsten carbide, ho etsa hore biti e be le ho nepahala ho phahameng, thepa e ntle ka ho fetisisa e bohale le ho apara.Ho laola sehlahisoa ka thata 'me u se ke ua lumella lihlahisoa leha e le life tse nang le bokooa' marakeng.Kaofela ha tsona ke litšobotsi tse hlahelletseng tsa Yasen.Ho sa tsotellehe hore na boemo ba tsamaiso ke bofe, sehlopha sa batsamaisi kapa basebeletsi ba litšebeletso kaofela ba ka thusa bareki ho rarolla mathata ohle ka tšebeletso ea boleng bo phahameng le e chesehang.
    Thepa e tsoetseng pele le thekenoloji ea nako e telele li hlahisa sehlahisoa sa boleng bo botle.Litsila tsa boleng bo holimo tsa micro grain carbide, lisebelisoa tsa ho etsa, li-drill le li-reamer tse tsoang Yasen li thehile seriti se phahameng ho la China Mainland, Asia Boroa-bochabela, Europe Bochabela le 'marakeng oa Amerika Boroa.
    Khamphani e latela maemo a profeshenale a filosofi ea ts'ebetso-Boitseanape, Boqapi, Sehlopha sa Ts'ebeletso, le sepheo sa botsamaisi - Boleng pele, ho feta Moreki.Ho fana ka seha se tšoarellang ka ho fetesisa sa boleng bo holimo bakeng sa nts'etsopele ea indasteri ea lehong.https://www.yasencutters.com/drill-bit/1590395790(1) - 副本具有限公Mo

    Ngola molaetsa wa hao mona mme o re romele wona